Window Installation in Fort Worth - Free Measure, Exact Written Quote

Trusted Window Installation for Fort Worth Homeowners

Window installation in Fort Worth comes down to one thing: getting a crew that shows up on time, writes the price down before the work starts, and stands behind the install for a full year. That is what we do at Meridian Windows and Doors Fort Worth. Elliot Vance leads our team, and every job runs to The Garrison Standard, the same operating code that has guided the Garrison Partners family since 2009. We stock eight manufacturer lines, so the window spec’d for your house is the one that fits the job, not the one sitting in a warehouse. Most single-window replacements in Fort Worth run $650 to $1,400 installed, depending on material and opening condition. Call (682) 708-0962 for a written, no-hassle quote.

Call (682) 708-0962

Casement Windows

Casement windows are hinged at the side and crank outward, which makes them the tightest-sealing operable window you can put in a Fort Worth home. The full sash presses against the weatherstripping when closed, so they outperform sliding windows in wind-driven rain and summer heat. We install casement windows from ES Windows and ECO Window Systems most often, because their hardware holds up to the hundred-degree Julys we get here. A standard casement replacement runs $550 to $1,200 per opening, with labor and finish trim included in the written price.

Crank Mechanism and Seal

The weak point on any casement is the crank gear and the seal it creates. We check both during the estimate, and when we install, we set the sash so it compresses evenly against the frame. That is the difference between a window that closes quietly for fifteen years and one that whistles by the second winter.

Best Rooms for Casements

Kitchens and bathrooms benefit most, because the crank lets you open the window fully with one hand even over a counter or sink. In Fort Worth’s older ranch homes, we often replace painted-shut double hungs with casements over the kitchen sink for exactly that reason.

Double Hung Windows

Double hung windows have two sashes that slide vertically, and both tilt in for cleaning. They are the most common window style in Fort Worth, so we replace more double hungs than any other type. The tradeoff with a double hung is the seal: it will never be as tight as a casement, but a well-installed unit from CWS or Mr-Glass comes close. Expect $600 to $1,350 per double hung installed, including the interior stops and exterior trim.

Tilt-In Sash and Balance

The tilt-in mechanism matters on the second story, because nobody wants to clean windows from a ladder. We replace the balance system whenever we install, even if the old one still works. A worn balance is the number one reason a double hung slams shut or won’t stay open.

Matching Historic Trim

Fort Worth’s Fairmount and Mistletoe Heights neighborhoods have older homes with wide, profiled wood trim. We spec double hungs that fit the existing rough opening without ripping out the original casing, and we caulk and paint the exterior to match. The written price covers that finish work, not just the window swap.

Vinyl Windows

Vinyl windows are extruded PVC frames with welded corners, and for Fort Worth they make sense because the material does not rot, does not need paint, and costs less than wood or fiberglass. A standard vinyl double hung or slider runs $450 to $900 installed in this market. We install vinyl from ECO Window Systems and Mr-Glass, and we tell you up front where vinyl is the right call and where it is not. The price on paper before the first screw turns is the only honest way to compare it against wood.

Welded vs. Mechanically Joined Corners

Cheap vinyl windows use screws in the corners. The corners we install are fusion-welded, which means the frame is one continuous piece of PVC at each joint. That weld is what keeps the frame from sagging in the Texas heat and what keeps the warranty from being a piece of paper you never use.

When Vinyl Is Not the Answer

For a picture window with a wide view, or for a bay that carries roof load, vinyl can deflect more than wood or reinforced fiberglass. We will tell you if vinyl is wrong for the opening, and we will spec something else from the eight lines we carry. The point is the right product for the opening, not the one that is easiest to sell.

Picture Window

A picture window is a fixed pane, no sashes, no cranks, no sliding panels. It exists for the view and the light. In Fort Worth, picture windows run $400 to $1,000 installed for a standard residential opening, and the price depends almost entirely on the glass package you choose. We install picture windows from PGT and CGI, including impact-rated glass for homes that want the added protection without bars or shutters.

Glass Package Selection

Low-E glass is a thin coating that reflects heat while letting light through. In a west-facing picture window, a high-performance low-E coating can cut the heat gain by half compared to clear glass. We write the glass spec on the estimate, so you know exactly what you are paying for.

Framing and Flashing

A fixed window is only as good as the flashing around it. We strip the old opening to the rough frame, inspect for rot, and rebuild the sill before the new window goes in. That sill rebuild is included in our written price if the rot is within two inches of the opening, which it usually is.

Bay Window Installation

Bay window installation means framing a projection out from the exterior wall and seating a three-window unit that angles the side windows toward you. It is a structural job, not a sash swap, and it changes the curb profile of the house. In Fort Worth, bay window installation runs $2,500 to $5,500 depending on the projection depth and whether the roof over the bay needs work. We do the framing, the sheathing, the roofing, and the interior finish as one written job.

Structural Support and Roof

A bay window carries its own weight plus the roof over it, so the support brackets and the roof flashing are the parts that fail when a cheap install goes bad. We frame the bay with pressure-treated lumber and tie the roof into the existing fascia. The written price covers the brackets, the flashing, and the drywall return inside the house.

Interior Seat and Finish

The window seat under a bay is part of the job. We frame the seat, insulate the cavity, and trim it out to match the room. If you want the seat as storage, we say so in the estimate and build it that way. No change order at the door.

Window Contractor

A window contractor is the licensed party who pulls the permit, orders the glass, and is legally responsible for the install. In Fort Worth, hiring a window contractor instead of a handyman matters because the city requires a permit for window replacement when the opening size changes, and a contractor who runs jobs to The Garrison Standard handles that without you having to think about it. Meridian Windows and Doors Fort Worth operates under that standard as part of the Garrison Partners family. We charge $650 to $1,400 per window for most replacements, and every job gets a written price before any work starts.

Permit and Inspection

When the opening changes, we pull the permit and schedule the inspection. The inspector checks the flashing, the shims, and the final seal. We schedule the inspection at the end of the job and make sure it passes before we call it done.

The Written Price

We hand you the price on paper before the first screw turns, and that price does not move. If we find rot in the opening, we show you, we photograph it, and we give you a written change before we touch it. No surprises, no door-knock markup. That is The Garrison Code on every Fort Worth job.

Window Installers

Window installers are the crew on the ground doing the actual removal, flashing, setting, and trim. At Meridian Windows and Doors, the installers who show up at your Fort Worth house are background-checked and uniformed, and they work under Elliot Vance’s supervision. Most single-window installs take half a day per opening, including the interior trim and the exterior caulk. We do not sub the finishing to a third party; the same crew hangs the window and finishes the sill.

Who Is In Your House

Every installer on our Fort Worth jobs wears a Meridian uniform and carries identification. We tell you who is coming before the truck arrives, and the person answering the phone at (682) 708-0962 knows the schedule and can tell you directly. No voicemail loops, no mystery crew.

Sill and Caulk Finish

The sill caulk is where most window jobs go wrong. We back-caulk the flange before setting the window, then tool the exterior caulk so it sheds water instead of trapping it. The interior trim gets a clean, painted finish with the joints tight. That finish work is part of the written price, not an optional add-on.

Brands We Service

CGI builds impact-rated windows and doors for the Texas coast, and we install their products for Fort Worth homeowners who want the same storm protection without giving up the look of standard windows. The CGI line we install most often is their casement and picture window series, which carry the strictest impact rating and still look like normal residential windows from the curb.

ES Windows and ECO Window Systems both build vinyl and aluminum lines that hold up well in the Fort Worth heat, and we spec them for homeowners who want a reliable mid-range window without paying for the coastal rating they do not need. Whether you have CGI, ES Windows, ECO, or any other make, we can quote the replacement and install it under the same 365-Day Done Right Promise.

Signs You Need a Pro Right Now

• Drafts you can feel at the sash. When cold air moves through in January or hot air pushes in during August, the weatherstripping or the seal has failed. The fix is usually a full replacement, not a caulk bead, because the sash has warped or the frame has settled.
• Condensation between the panes. Fogged glass means the seal between the two panes is broken and the insulating gas is gone. The window is now a single pane in terms of efficiency, and the only repair is a new insulated unit in the same frame.
• Sashes that stick or refuse to stay open. That is a balance or frame issue, and on a second-story window it is a safety problem. A double hung that slams shut on a hand is not something to live with.
• Soft wood or peeling paint at the sill. Water has been getting in, and the rot will spread to the rough opening and the wall framing. The longer it sits, the bigger the framing repair becomes and the more the written price changes.
• Exterior noise you never used to hear. Glass and seals degrade over time, and when the traffic from I-35W or the train horns near the Fort Worth rail yard start coming through the window, the unit has lost its acoustic performance.

Our Process, Step by Step

1. 1
   Measure and inspect. We measure every opening with a laser, check the rough frame for square and level, and photograph the existing conditions. If there is rot, we probe the sill and note the repair in the written quote, not after the window is out.
2. 2
   Written estimate. The price goes on paper before any work starts, with the window line, the glass package, the trim scope, and the finish work itemized. That price does not change unless you change the scope, and we write that change down too.
3. 3
   Permit and order. We pull the city of Fort Worth permit if the opening changes, and we order the window to the exact size we measured. The lead time depends on the manufacturer line, but we give you the ship date when we place the order.
4. 4
   Removal and set. Our crew strips the old window, repairs any rot, flashes the opening, shims the new unit square and level, and seals it against water and air. The caulk gets tooled, not smeared.
5. 5
   Finish and walkthrough. We trim the interior, paint or wrap the exterior as written, clean the glass, and walk the job with you before we leave. Then we hand over the 365-Day Done Right Promise in writing, covering the install for a full year with no labor exclusions.

How Much Does Window Installation Cost in Fort Worth?

Our Service Area Near Fort Worth

We install windows throughout Fort Worth and the surrounding cities, including Window Installation in Benbrook, Window Installation in Bedford, Mansfield, Colleyville, Watauga, Richland Hills, Crowley, Sansom Park, River Oaks, Haltom City, and Lake Worth. Most jobs within fifteen miles of our Fort Worth base get an estimate visit within a couple of days. The quoted schedule is in the written estimate, and the crew shows up when the paper says they will.

Frequently Asked Questions About Window Installation in Fort Worth

Schedule Your Window Installation Service in Fort Worth Today

If your windows are drafty, fogged, or sticking, call (682) 708-0962 for a free written estimate. Elliot Vance and the Meridian Windows and Doors Fort Worth team will measure your openings, hand you a price on paper, and stand behind the install for a full year. Home is a good place to start if you want to see everything we do. No pressure, no surprises, just a straight number before any work begins.

Written by Elliot Vance, Owner at Meridian Windows and Doors Fort Worth, serving Fort Worth since 2009.