New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Fort Worth, TX | Meridian Windows and Doors Fort Worth
We service and replace Therma-Tru entry doors and Fort Worth Window Replacement as an independent provider, not a factory-authorized dealer. That matters because our only loyalty is to what your brick-veneer, slab-on-grade home actually needs. The single biggest difference in our Therma-Tru work here comes down to one thing: Fort Worth clay moves, and doors that were square a decade ago rarely still are. Call (682) 708-0962 for a free estimate on any Therma-Tru repair or replacement.
Why Fort Worth Residents Choose Us for Therma-Tru Service
We’ve been working on Therma-Tru doors in this city long enough to know the Classic-Craft line honestly, which means we can spot a warped slab, a failing Q-Lon seal, or a seized Tru-Defense lock without guessing. Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and has spent more than two decades fitting doors and windows across Texas. He’s the one who sets the standard on every job we run, and he still measures every rough opening himself on trickier Fort Worth homes.
Being independent means we make the call that serves your house, not a warranty quota. When an OEM Therma-Tru hinge, threshold, or lock set is the right fix, we use it. When a slab is too far gone and a new door system is cheaper than chasing an old one, we tell you straight. We stock common Therma-Tru parts locally, which keeps most Fort Worth service calls from dragging into multi-week waits. Our technicians are background-checked and uniformed, so you know exactly who’s at your door.
Common Therma-Tru Windows & Doors Problems We Solve in Fort Worth
- Warped or misaligned fiberglass slabs on Classic-Craft doors. Fort Worth summers hit 100°F routinely, and west-facing doors bake. Fiberglass handles heat better than wood, but against a tight brick opening with zero room to flex, even Classic-Craft slabs can bow over time. We check the reveal, the threshold, and the rough opening before recommending a repair or a full-frame replacement.
- Rust and hinge sag on Smooth-Star steel doors. Hail season in Fort Worth isn’t gentle on steel. Repeated ice storms and hail strikes chip the factory finish, and once moisture gets into those micro-scratches, rust starts. The hinges take the load and sag follows. We replace hinge sets with OEM parts and address the rust before it eats through the skin.
- Brittle, cracked Q-Lon weatherstripping on Classic-Craft doors. The UV here is brutal. Q-Lon is a good product, but after two or three Fort Worth summers of direct exposure, it hardens and loses its spring. You’ll see light gaps at the top corners and feel drafts in January. We stock replacement Q-Lon and swap it in about an hour on most doors.
- Failed multipoint locks and seized deadbolts on Tru-Defense systems. Fort Worth sits on expansive clay, and door frames rack. When the frame shifts even a quarter inch, the bolts on a multipoint lock stop lining up with the strikes. Dust from our dry summers doesn’t help either. We re-square the door and adjust or replace the lock mechanism so all points engage.
- Worn thresholds and water intrusion at the sill. Slab foundations mean the door sits close to grade. When the slab heaves, the threshold compresses or pulls away, and a hard Fort Worth rain finds its way under the door. We replace thresholds and re-seal the pan, but we always check the slab movement first so we’re not fixing the same leak twice.
Therma-Tru Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth’s housing stock is overwhelmingly brick veneer over wood framing on slab foundations. That’s true from the 1920s Craftsman bungalows in Fairmount to the mid-century brick ranches across Wedgwood and Meadowbrook, and it changes how Therma-Tru doors get serviced here compared to cities with different construction types. Because Fort Worth sits on expansive clay, slab foundations heave seasonally and cause door frames that were originally square to rack by a quarter inch or more. Our Therma-Tru work almost always starts with measuring the rough opening’s diagonal to decide between a full-frame replacement or a slab-only swap. In the Ridglea and TCU area, 1950s steel casement windows with single-pane glass and rusty operators are notorious, and our Window Installation in Fort Worth handles these upgrades regularly. Swapping those for modern vinyl or fiberglass often requires custom brick-to-brick sizing because the original rough openings were undersized. Last summer our tech pulled up to a 1980s brick ranch in Wedgwood where a Classic-Craft 3-panel door had been rubbing the threshold for months. The home’s slab had shifted just enough to drop the hinge side, so we removed the old door, squared the rough opening with a custom jamb extension, and installed a new Classic-Craft collection door with adjustable hinges and a Tru-Defense threshold. Now the homeowner can deadbolt it with one finger even after a wet spring. The seal either holds or it doesn’t – we make sure it holds.
Therma-Tru Models & Products We Service in Fort Worth
We service and replace the full Therma-Tru entry door lineup, including Classic-Craft fiberglass entry doors, Pulse and Smooth-Star steel entry doors, and Tru-Defense door systems. Benchmark by Therma-Tru, available through local dealers, is another line we handle regularly. When a part needs replacing, we source OEM Therma-Tru hinges, thresholds, weatherstripping, and lock sets first. Knock-off parts rarely match factory tolerances, and they can compromise the door’s structural performance. Some common Therma-Tru parts we keep on hand locally, which speeds up most Fort Worth repairs. If a slab is badly warped or the frame has rotted through, we’ll price a new door system against the repair cost so you can make an honest call. For full Therma-Tru sales & service, our team handles everything from entry doors to replacement doors and full frame replacements.
Therma-Tru Service Pricing in Fort Worth
Most Therma-Tru entry door repairs in Fort Worth run between $150 and $500 depending on the part and the extent of frame adjustment needed. Weatherstripping replacement typically starts around $150. Re-hanging a door with new hinges and a squared frame generally falls between $250 and $450. A full Therma-Tru entry door replacement, including a new slab, frame, and hardware, usually lands between $1,800 and $4,500 installed, with the final number set by the model, glass package, and whether the brick opening needs custom work. What drives the cost here is the rough opening. If your slab has shifted and the frame is racked, there’s more labor in squaring things up. Every estimate we give is a written, line-item price before any work starts. It doesn’t move at the door. Call (682) 708-0962 to schedule your free estimate in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Fort Worth
Classic-Craft fiberglass doors can be trimmed slightly on the edges, but there’s a hard limit. You can usually take off about a quarter inch per side without compromising the structural integrity. Fort Worth slab shifts often leave openings out of square by more than that, which is why we measure the diagonal before making any trim call. If the opening needs more than a minor adjustment, a full-frame replacement is the safer option. Call (682) 708-0962 and we’ll measure it for free.
Direct sun and 100°F heat bake the Q-Lon weatherstripping on your door, and UV breaks down the material faster here than in northern climates. That’s the short answer. West-facing doors in Fort Worth see the worst of it. We replace Q-Lon with OEM Therma-Tru weatherstripping, which holds up as well as anything on the market but will eventually need replacing again in our climate. Call (682) 708-0962 to get your exact cost.
Yes, but let’s be precise about why. Hail chips the factory finish, and ice storms add moisture that gets into those chips. Fort Worth’s freeze-thaw cycle accelerates the rust once the coating is compromised. Smooth-Star steel doors will rust faster here than in drier climates with less hail exposure. The fix is addressing chips early with touch-up paint and replacing rusted hinge sets with OEM parts. If the rust has eaten through, a new door system usually makes more financial sense.
We can, but it’s a custom job. Those 1950s openings in Fort Worth’s Ridglea and TCU areas were framed undersized by today’s standards, so a standard Therma-Tru pre-hung door won’t slide right in. The brick opening usually needs to be resized or a custom jamb built out. We’ve done this work repeatedly across Fort Worth, and the result is a properly sealed Therma-Tru door that actually fits the masonry opening. Call (682) 708-0962 for a free estimate on the scope.
That’s almost always a frame alignment issue, not a lock failure. Tru-Defense multipoint locks are precise, and when Fort Worth clay shifts the frame even slightly, the center bolt stops lining up with its strike plate. We square the door, adjust the hinges, and the bolts re-engage. If the lock mechanism itself has dust or debris from our dry summers, we clean and lubricate it. Cost for this repair typically runs $150 to $300 depending on how much frame adjustment is needed. Call (682) 708-0962 and we’ll diagnose it.
Service Areas Near Fort Worth
Our Therma-Tru service covers all of Fort Worth service area plus the surrounding communities. We regularly work in Therma-Tru service in Benbrook, Therma-Tru service in Bedford, Mansfield, Colleyville, and Watauga. If you own a Therma-Tru door in any of these areas, the same crew and the same written pricing apply.
Book Your Therma-Tru Service in Fort Worth Today
If your Therma-Tru door is sticking, leaking, or the lock won’t engage, call us. We’ll send a tech who knows Fort Worth’s slab and brick homes, gives you a written price before any work starts, and stands behind the job with our 365-Day Done Right Promise. Call (682) 708-0962 for your free estimate.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fort Worth, serving Fort Worth since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.