New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Fort Worth, TX | Meridian Windows and Doors Fort Worth
We provide independent ES Windows service and installation across Fort Worth, from Fairmount bungalows to far north Alliance tract homes. The difference here: our crews know how ES Windows aluminum frames behave when set into brick veneer openings on slab foundations that shift with clay soil. That local knowledge is what we bring to every repair, parts replacement, and full-frame install. Call (682) 708-0962 for a free estimate, and see our ES Windows sales & service overview if you’re researching the brand itself.
Why Fort Worth Residents Choose Us for ES Windows Service
We are not an ES Windows dealer. We are an independent contractor that has field-serviced their aluminum frames, hardware, and glass packages in Fort Worth’s brick-veneer homes for years. That independence means we call it like we see it. If a repair makes sense, we say so. If the frame is beyond saving and Window Replacement in Fort Worth is the honest answer, we say that too. Elliot Vance, owner of Meridian Windows and Doors Fort Worth, learned the trade at Los Angeles Trade-Technical College and has spent more than two decades measuring, fitting, and finishing windows and doors across Texas. He does not tell homeowners what they want to hear when the straight answer serves them better. Every job, repair or replacement, gets a written price before work begins. And every job is covered by our 365-Day Done Right Promise. If the work fails within a year, we come back at no charge. That is the whole point of the name: a meridian is a fixed line you measure everything against.
Common ES Windows Windows & Doors Problems We Solve in Fort Worth
- Bent or misaligned aluminum sashes from hail. Fort Worth’s severe thunderstorm season throws hail hard enough to dent aluminum frames and knock sashes out of square. The result is gaps that leak air and let water find the rough opening. We straighten what can be straightened and replace what can’t, then re-set the sash so the weatherstripping actually seals.
- Fogged insulated glass units. West-facing ES Windows in Fort Worth take direct afternoon sun and 100°F-plus heat for months every year. That thermal cycling shortens the life of the seal in the insulated glass unit. Once the seal fails, the glass fogs and the low-E coating no longer does its job. We replace the IGU and check the frame for racking before we button it back up.
- Worn rollers and sticking tracks in sliding glass doors. Clay soil under a Fort Worth slab expands and contracts with moisture swings, and that subtle movement shifts the door frame. Add North Texas dust, and the rollers grind down and the track fills with grit. We clean, adjust, and replace worn rollers so the door moves again without a fight.
- Corroded or seized casement hardware. Ice storms coat ES Windows crank operators and hinges in moisture, then summer humidity keeps it there. We have seen crank handles shear off and locking points that refuse to engage. We replace operators and hardware with exact-fit or aftermarket components that meet the original spec.
- Air leaks between frame and brick veneer. Most Fort Worth homes have windows set directly against the brick with minimal flashing. Over time, settlement and thermal movement break the seal at the perimeter. We re-flash, re-caulk, and air-seal so the gap stops working like a chimney leak.
ES Windows Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here is the thing about Fort Worth that does not get talked about enough. In the Ridglea and TCU areas, a lot of 1950s homes were built with steel casement windows and single-pane glass. The original rough openings were cut tight, sometimes undersized by half an inch or more. ES Windows aluminum frames are not standard-depth, so when you swap out the old steel casements, the new frame often does not slip into the existing hole without work. You need custom brick-to-brick sizing, and you need new flashing details, because the old flashing was either absent or rotted away decades ago. For professional Window Installation in Fort Worth, getting these details right matters. In a 1952 brick ranch off Camp Bowie Boulevard, our crew removed a rusted single-pane steel casement and set an ES Windows Premium Series casement with low-E glass. The rough opening was half an inch too narrow, so we notched the brick carefully and custom-flashed the full perimeter to stop air movement through a wall that had shifted with the clay. The homeowner noticed the room held temperature better within a day, and the crank turned without fighting. That is the kind of detail work a generic window company, one that mostly does Dallas pier-and-beam or Arlington tract housing, is not set up for.
ES Windows Models & Products We Service in Fort Worth
We service the full ES Windows range that shows up in Fort Worth homes: the Premium Series aluminum thermally broken frames, the Impact Series built to Miami-Dade standards, the Casement Series, and the Sliding Glass Door Series. When a part fails, we source genuine ES Windows components where they are still available. But the brand has discontinued certain pieces over the years, and some imported parts are simply not cost-effective to wait on. In those cases, we use high-quality aftermarket equivalents that meet or exceed the original spec. We carry common rollers, operators, weatherstripping, and hardware in local stock for faster Fort Worth turnaround. When a repair is not economical, or when the frame is too far gone, we will say so and price a full-frame replacement. And when brick-to-frame clearances are tight, we plan for that on the front end instead of discovering it on install day.
ES Windows Service Pricing in Fort Worth
Most single ES Windows replacement jobs in Fort Worth run $600 to $1,400 installed, depending on the model, glass package, and whether we are dealing with a straight swap or custom brick-to-brick sizing. Impact Series windows run higher, often $900 to $2,000 per unit, because of the laminated glass and heavier frame. Hardware repairs like roller, operator, or lock replacement typically land between $150 and $400. Insulated glass unit replacement runs $250 to $600 per unit, depending on size and coating. Sliding glass door service spans $300 to $2,500 depending on whether it is a roller job or a full door replacement. The written price you get before work starts is the price you pay. No change orders at the door. Call (682) 708-0962 to schedule a free estimate, and we will put the number on paper.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Fort Worth
Clay soil movement under the slab shifts the door frame over time, and the dust that blows through Fort Worth settles in the track and grinds against the rollers. What starts as a sticky door becomes a jammed one as the rollers wear flat. We clean the track, re-align the frame, and replace the rollers. Call (682) 708-0962 for an exact quote, and we will tell you if it is a simple roller job or a deeper frame issue.
Yes. Fort Worth gets hail and high wind from spring line storms and occasional tornado warnings, and the Impact Series is built to Miami-Dade hurricane standards. That laminated glass and reinforced aluminum frame hold up better against hail and wind-driven debris than standard annealed glass. If you are replacing west-facing or south-facing windows, impact-rated glass is a solid investment for a Fort Worth home.
Yes. When the seal fails and the unit fogs, you do not always need a new window. The insulated glass unit, or IGU, can be removed and replaced while the existing frame stays in place. We check the frame for racking first, because if the frame has shifted, a new IGU will fail again. For a Fort Worth home on clay soil, that frame check matters.
Yes. Brick veneer walls are not waterproof. They are a rain screen. The flashing around a window opening is what keeps water out of the wall cavity. ES Windows aluminum frames are not standard depth, so the flashing detail has to be built for the frame and the brick opening. We custom-flash every full-frame replacement we set into Fort Worth masonry. Call (682) 708-0962 and we will walk you through what that means for your specific home.
Better than non-thermally-broken aluminum, which is what you find on a lot of older Fort Worth homes. ES Windows Premium Series frames have a thermal break, a separating layer inside the frame that stops heat from conducting straight through the metal. Add low-E glass and the window performs well under 100°F afternoons. But no window is maintenance-free, and the seals will eventually fail under prolonged UV. When that happens, we are ready in Fort Worth.
Service Areas Near Fort Worth
We run ES Windows service across Fort Worth service area neighborhoods from Fairmount to Alliance, and into the surrounding cities: ES Windows service in Benbrook to the southwest, ES Windows service in Bedford to the northeast, plus Mansfield, Colleyville, and Watauga. If you are in Tarrant County and own ES Windows, you are in our range.
Book Your ES Windows Service in Fort Worth Today
We answer the phone with a live person, every day, every hour. No voicemail loops. Call (682) 708-0962 and tell us what your ES Windows are doing, or not doing. We will schedule a free estimate, put the price in writing before any work starts, and back the whole job with our 365-Day Done Right Promise. The seal either holds or it doesn’t. We make sure it holds.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fort Worth, serving Fort Worth since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.