New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Window Replacement: The Fort Worth Owner’s Guide
We stock and install ES Windows-compatible replacement windows across Fort Worth, with most single-unit replacements running $650 to $1,450 installed depending on size, glass package, and frame condition. We keep common ES Windows hardware, balances, seals, and glass packs on the truck, so a straight swap is often done the same day we arrive. Most owners call us after noticing a window that won’t stay up, drafts they can feel from across the room, or condensation they can’t wipe away because it’s trapped between the panes.
ES Windows builds a good product, but Fort Worth heat and humidity work against every seal eventually. The high-temp swings we get from March through October cause frame expansion and contraction that breaks down weatherstripping faster than you’d see in milder climates. What starts as a stiff sash becomes a window that fights you, then a window that won’t seal at all. Meridian Windows and Doors Fort Worth is an independent service provider, not affiliated with ES Windows, but we’ve installed and replaced enough of their product line across Tarrant County to know exactly what fails and what fixes it for good.
Which ES Windows Models This Applies To
ES Windows has produced several series over the years, and the replacement path depends on which one you have. The two most common in Fort Worth homes are the ES Impact Series (aluminum-reinforced, built for coastal wind codes but sold inland too) and the ES Vinyl Series (thermally efficient, lighter frame, more common on 1990s and 2000s builds). Each series uses different balance channels, shoe styles, and glazing beads, so a part from one will not necessarily fit the other.
To identify your model, open the sash and look at the top edge or the hinge side. ES stamps a small manufacturer label with the series code, glass type, and sometimes the build date. If the label is gone – and in Texas heat, those stickers peel off a lot – measure the visible glass width and height to the nearest 1/8 inch and snap a photo of the corner joint and the balance channel. If you text those to us at (682) 708-0962, we can usually name the series before we even set foot in the house. On the OEM versus aftermarket decision: ES Windows OEM parts are solid but often backordered by weeks. For most replacements we spec exact-spec equivalents from suppliers we’ve used for years on ES jobs. Same dimensions, same load rating, no guessing. We’ll tell you which is which in the written quote before any work starts.
Signs Your ES Windows Window Replacement Is Failing
- The sash drops when you raise it. This is almost always a failed balance system. The coil or spiral balance inside the jamb has lost tension or snapped. It’s a common ES failure in Fort Worth because heat cycling weakens the spring steel over time.
- You feel a draft even when the window is locked. The weatherstripping has compressed and won’t recover, or the frame has warped enough to leave a gap. Drafts at the meeting rail are the classic first sign before you ever see condensation.
- Condensation or haze between the glass panes. The insulated glass unit (IGU) seal has failed. Once the desiccant inside the spacer bar is saturated, no amount of cleaning fixes it. This is a glass pack replacement, not a full window replacement, and we do those frequently.
- The window sticks or requires force to open. Dirt and grit accumulate in the tracks, but on ES models it’s often a deformed vinyl shoe or a balance that’s now dragging instead of lifting. Forcing it chews up the track and turns a $200 repair into a $900 replacement.
- You hear outside noise more than you used to. Same cause as the draft: the seal isn’t sealing. A failed weatherstrip lets in Fort Worth’s traffic noise from I-30 or the train horns near the Stockyards. That’s the window telling you the seal has quit.
One Fort Worth-specific note: homes in Ridgelea and Arlington Heights with original 1980s or 1990s ES windows are hitting the age where the first generation of vinyl balances give out. We see clusters of the same failure in neighborhoods where the houses all went up around the same time with the same product line.
Replacement Cost & What’s Included
Here’s what we typically see in Fort Worth, installed:
- Weatherstripping replacement: $140 – $280 per window, parts and labor
- Balance system replacement (per sash): $180 – $320, including the new balances and shoes
- Single-pane glass replacement: $220 – $450 depending on size and tint
- Dual-pane IGU replacement (sealed unit): $350 – $700, with low-E options available
- Full window replacement (ES-compatible sash and frame parts): $650 – $1,450 per opening installed
The range depends on window size, glass package (clear, low-E, impact-rated), and whether we’re replacing the sash or the full frame. We write every price down before work begins, and that number does not move at the door. Parts and labor are itemized. The work is covered in writing for 365 days – if it fails within that year, we come back at no charge. That’s the whole point of the guarantee.
DIY or Call Us?
This is where we split it straight. If your ES window is drafty but still opens and closes, you can check a few things yourself: clean the tracks with a dry brush, tighten any visible screws on the lock hardware, and feel along the weatherstrip for missing chunks. Those checks cost you nothing and sometimes buy you time.
But once a balance has snapped or an IGU seal has failed, this is not a caulk-and-pray job. Balance systems hold tension, and a released coil balance can take a chunk out of your hand if you open the jamb without knowing how to relieve it. Glass packs on ES models are glazed tight, and an improper shim turns a clean swap into a cracked frame. Elliot Vance has spent over two decades doing this work across Texas, and his rule is simple: “The seal either holds or it doesn’t – we make sure it holds.” If you’d rather hand it off to someone who installs ES windows every month, call (682) 708-0962 and we’ll get it scheduled.
FAQs
With proper maintenance, ES Windows vinyl frames typically last 20 to 30 years in North Texas, but the hardware and seals usually need attention by year 12 to 15 because Fort Worth’s heat and humidity breaks down weatherstripping and balance tension faster than the frame itself. A well-maintained ES window can go the distance; a neglected one shows its age early. Call (682) 708-0962 if you’re unsure where your windows stand.
Yes, and we do repairs more often than full replacements in Fort Worth. Weatherstripping, balances, locks, and single glass packs are all repairable on ES models. We’ll make the call on repair versus replace based on frame condition and what the failed part has already damaged. We stock repair parts from PGT, CGI, CWS, as well as ES-compatible hardware, which keeps the repair route open for more homeowners. Call us and describe the symptom; we’ll give you a straight answer.
A standard sash or balance replacement runs about 45 minutes per window from setup to clean-up. A full-frame ES window replacement can take two to four hours depending on brick work, stucco, or trim conditions. We schedule a clear window of time and we show up when we say we will, in uniform, with the parts on the truck.
We keep the most common ES Windows replacement parts on our trucks in Fort Worth: balance systems for both the Impact and Vinyl Series, weatherstripping profiles, lock sets, and a range of standard-size glass packs. If we arrive and find a size or series we don’t have, we order it direct and you’ll have the exact part spec in writing before we install. Estimates are free, so call (682) 708-0962 and we’ll tell you what you’re looking at.
If your ES window is giving you trouble, call Meridian Windows and Doors Fort Worth at (682) 708-0962. We’ll show up, measure it right, put the price in writing, and stand behind the work for a full year.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fort Worth at Meridian Windows and Doors Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.