New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Fort Worth Homeowners Choose ECO Window Systems Windows & Doors
Meridian Windows and Doors Fort Worth provides independent ECO Window Systems service in Fort Worth, including windows and doors repair and installation. We’re not a manufacturer call center and we’re not an authorized ECO Window Systems dealer. We’re a local crew that has taken apart, rebuilt, and retrofitted enough ECO 4000, 6000, 500, 820, and HT Impact units to know exactly how they fail in North Texas clay soil and hail country. Most ECO repair calls in Fort Worth come down to one of four problems: heat-cycled vinyl frames, worn spring balances, jammed roller tracks, or blown seals on impact glass. Call (682) 708-0962 and we’ll tell you over the phone what’s likely wrong and what it should cost before we ever set foot on your property.
Why Trust Meridian Windows and Doors Fort Worth for Your ECO Window Systems Windows & Doors?
Our founder, Elliot Vance, learned the window and door trade at Los Angeles Trade-Technical College before spending more than two decades measuring, fitting, and finishing fenestration across Texas. He has pulled ECO sashes apart in Fairmount bungalows built in the 1920s and squared ECO frames in 2000s tract homes up near Alliance, and he’s handled Eco Window Systems repair in Bedford as well. The crew he built around him operates the same way: factory-trained on ECO’s specific engineering, but independent from the manufacturer. That distinction matters. We spec the fix based on what the window actually needs, not what a brand rep wants sold. If your ECO 4000 Series single hung needs a $38 balance replacement, that’s what we quote. We don’t upsell a full replacement when a repair holds.
Every job, whether it’s a tilt-latch adjustment on an ECO 820 Series casement or a full ECO HT Impact insert replacement, gets a written price before work starts. That price does not move at the door. And every job is covered by our 365-Day Done Right Promise: if the repair or install fails within a year, we come back at no charge. Elliot’s rule on every ECO unit we touch is the same line he’s used for years: “The seal either holds or it doesn’t – we make sure it holds.” We also answer our phones with a live person, 24 hours a day, every day. No voicemail loops.
Common ECO Window Systems Windows & Doors Problems We Fix in Fort Worth
Fort Worth’s climate is rough on fenestration. Summers push past 100°F for weeks. West-facing units bake in UV that would fade paint off a fence. Sudden thunderstorms bring hail big enough to crack a windshield. And the clay soil under most Fort Worth slabs shifts with every wet-dry cycle, which moves frames just enough to create binding and air leaks. Here are the ECO-specific failures we see most often:
- Sagging or misaligned sashes on ECO 4000 and 6000 Series double hungs. Vinyl expands and contracts with heat. After enough Fort Worth summers, the frame rails can bow slightly, and the sash starts binding in the track. You’ll feel resistance halfway up, or the sash will drop crooked when you release it. We re-square the frame rails and replace worn balances, which usually restores smooth operation without a new window.
- Worn spring balances and tilt-latch failures on ECO single hungs. This is the classic ECO 4000 Series complaint: the sash drops suddenly or won’t stay open. The constant-force springs inside the jamb liner wear out, and once one side fails, the other follows. If you hear a snap when tilting the window in for cleaning, that’s the tilt latch. Both are straightforward repairs we handle same-visit with OEM-equivalent parts.
- Track jamming and roller degradation on ECO 500 Series horizontal sliders. Dust, pollen, and the fine clay grit that blows around Fort Worth accumulate in the bottom track. The rollers, usually nylon or plastic on the 500 Series, grind down over time. The window becomes a two-hand shove to open. We clean or replace the track, swap in new rollers sized to the frame, and the panel slides like it did when it was installed.
- Fogging between panes on ECO HT Impact Series units. Hail doesn’t have to shatter impact-rated glass to kill a window. A direct hit can flex the frame enough to crack the seal, and once the seal fails, moisture gets between the panes. You’ll see condensation that won’t wipe away. That’s a broken seal on the insulated glass unit, and the fix is replacing the IGU, not the whole frame. We match the original glass spec, including low-E and laminated impact layers.
- Binding operators and stripped cranks on ECO 820 Series casements. Casement windows rely on a geared operator and a hinge system. In Fort Worth, those hinges collect grit, the operator gear lubricant dries out, and the crank eventually strips or slips. If the sash still closes flush, we replace the operator and lubricate the hinges. If the sash is sagging past a quarter inch, we reset the hinge geometry or talk honestly about whether a full replacement makes more financial sense.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
We stock OEM-equivalent aftermarket parts for ECO Window Systems units: constant-force balances, tilt latches, nylon and steel rollers, weatherstripping, casement operators, and lock hardware. These parts meet or exceed ECO’s original specifications, and we select them by measured frame dimension, not by branding. Your ECO 4000 Series double hung gets a balance rated for the exact sash weight, not whatever’s on the truck.
Here’s the honest math we use on every repair-vs-replace decision. If the repair cost would exceed roughly 60% of a new unit’s installed price, and the frame is otherwise nearing end-of-life, we’ll tell you to replace. Otherwise, we repair. A sagging 2014 ECO 6000 Series in Arlington Heights that needs balances and frame re-squaring? That’s a repair, and it’ll cost you a fraction of a window replacement. A 2009 ECO HT Impact with a blown seal, a warped frame, and a stripped operator? Replace it. We don’t make money convincing you to spend money you don’t need to. We make money because when you need a window done right next time, you call us. For a written line-item quote, call (682) 708-0962.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We measure the sash, the frame, and the reveal. We check the track for grit, the balances for spring tension, and the seal for moisture. On ECO 4000 and 6000 units, we look specifically at the tilt-latch clearance and the uniformity of the frame rails. You get a written diagnosis and a written price before any work begins.
- 2
Repair or install. For repairs, we use OEM-equivalent parts sized to the frame. For insert replacements, we pull the old sash, keep the original frame where it’s sound, and set the new unit into the opening with backer rod and sealant matched to Fort Worth’s thermal swing. Brick-to-frame interfaces on your Fort Worth home get extra attention, because that’s where air leaks start.
- 3
Test. Every ECO window we touch gets cycled open and closed a minimum of five times. We check lock engagement, sash travel, and frame-to-jamb fit. On impact units, we verify the laminated glass is seated and the seal is intact.
- 4
Warranty. Your job is covered in writing for 365 days. If the repair fails, the sash binds again, or the seal goes, we return at no charge within the year. That’s the Done Right Promise, and it’s on every invoice.
ECO Window Systems Products We Service & Install in Fort Worth
We service and install the full ECO Window Systems Windows & Doors in Benbrook, TX and throughout Fort Worth: the ECO 4000 Series single hung, ECO 6000 Series double hung, ECO 500 Series horizontal roller, ECO 820 Series casement, and the ECO HT Impact Series rated for hurricane-force wind and hail. We stock common hardware locally for the 4000, 6000, and 500 Series so most repairs don’t wait on a parts shipment. Insert window replacement is our standard for ECO frames that are still structurally sound, and we match the original grid pattern and glass coating on every new unit. If you’re unsure which series you have, look for the label on the top of the sash or the side of the frame – it’s usually there, fading but legible.
We Also Service These Brands
ECO Window Systems is one of eight manufacturer lines we work with daily. We also service and install PGT impact windows, CGI hurricane-rated products, CWS aluminum and vinyl units, and ES Windows architectural lines. That breadth means we’re not pushing one brand on a house that would be better served by another. If an ECO repair doesn’t pencil out, we’ll tell you what does, from the portfolio we actually stock and trust.
FAQs – ECO Window Systems Windows & Doors Service in Fort Worth
No. We are an independent ECO Window Systems service provider with no manufacturer affiliation. Our techs are factory-trained on ECO’s engineering and we carry OEM-equivalent parts, but we operate independently. That independence is what lets us recommend a $50 repair when a dealer might push a $900 replacement.
We use OEM-equivalent aftermarket parts – balances, tilt latches, rollers, weatherstripping, and operators – that meet or exceed ECO’s original specs. We select parts by measured frame dimensions and sash weight, not by brand label. For glass replacements on ECO HT Impact units, we match the original laminated impact spec and low-E coating exactly. If you want manufacturer-branded ECO parts specifically, we can order them; expect a longer lead time and a higher price.
The constant-force spring balances inside the jamb have lost tension. When one side fails, the sash becomes unbalanced and drops. Sometimes it’s the balance itself; sometimes the tilt-latch shoe has stripped and isn’t holding the balance securely. Both are repairable in one visit. Call (682) 708-0962 and describe what you’re seeing – we can usually confirm the cause over the phone and quote the fix.
Rarely, but it can happen. Impact-rated glass is designed to take a direct hit from windborne debris and crack without shattering, not to be indestructible. A large enough hailstone at the right angle can crack the outer lite. More commonly, hail flexes the frame enough to break the insulated seal, which causes fogging between panes rather than visible glass damage. Both are repairable: cracked lites get an IGU replacement matched to the original spec, and blown seals get a new glass unit installed into the existing frame. Call (682) 708-0962 for an exact quote – estimates are free.
Usually it can be fixed. The bottom track on the ECO 500 Series collects grit, dust, and clay from Fort Worth’s dry spells, and the rollers grind down against it. We clean the track, replace worn rollers with units sized to the panel weight, and adjust the alignment so the window glides. If the track itself is deeply gouged or the frame is warped from heat, that’s a different conversation – but nine times out of ten, it’s a roller job. Call (682) 708-0962 and we’ll tell you straight what you’re looking at.
Yes. The ECO 6000 Series has tilt-in sashes operated by two tilt latches at the top of the lower sash. Press the latches inward and the sash tilts toward you for cleaning both the interior and exterior glass from inside the house. If a latch won’t release, or the sash drops while tilted, the tilt-latch mechanism or the balances are worn. We replace them same-visit with OEM-equivalent parts.
Most ECO repair jobs in Fort Worth run $125 to $385 depending on the part and the series. A balance replacement on an ECO 4000 or 6000 Series typically runs $180 to $280 per window. Roller replacement on an ECO 500 Series slider typically runs $150 to $250. A blown IGU on an ECO HT Impact Series is the bigger ticket: $400 to $900 depending on glass size and impact spec. Full insert replacements start around $650 per window for standard sizes and go up from there. For a written line-item quote on your specific unit, call (682) 708-0962 – estimates are free and there’s no obligation.
The insulated glass seal has failed. Moisture has penetrated the space between the two (or three) panes, and once it’s in there, it doesn’t come out. Morning condensation is the tell – it’s the temperature differential between the inside and outside glass surfaces. The fix is replacing the glass unit, not the whole window. We unglaze the old IGU, set in a new one matched to the original low-E and argon spec, and reseal it. Most ECO 820 Series IGU replacements run $300 to $550. Call (682) 708-0962 for an exact quote.
Book Your ECO Window Systems Service in Fort Worth, TX
If your ECO window or door is misbehaving, call (682) 708-0962. A live person answers, day or night. You’ll get a straight answer about what’s likely wrong, what it should cost, and whether repair or replacement makes more sense. Written price before work starts. One-year written guarantee on every job. No pressure, no pitches.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fort Worth, serving Fort Worth since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.