New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Patio Door Installation for Fort Worth Homeowners
A patio door that sticks, leaks air around the frame, or has a fogged pane is a problem you will feel every single day, especially during a Fort Worth summer when temperatures sit above 95 degrees and your AC is already working hard. Since 2009, Meridian Windows and Doors Fort Worth has installed and repaired patio doors across Tarrant County, from Benbrook to Bedford, under a standard that puts the price on paper before any work starts. We do not leave a job without a written 365-day guarantee, and we answer the phone with a live person around the clock. Call (682) 708-0962 and we will talk through your door, what it is doing, and what it will take to set it right.
Patio Door Repair
Patio Door Repair means getting a door that drags, rattles, leaks, or no longer locks back to square without replacing the whole unit unless it actually needs it. In Fort Worth, the two things that drive most repair calls are heat warping aluminum frames and settling foundations shifting door openings slightly out of square. Meridian Windows and Doors Fort Worth will assess the track, rollers, weatherstripping, and frame, then give you a written price before we touch anything. Most basic patio door repairs run $150 to $450 installed, depending on whether we are adjusting hardware, replacing rollers and seals, or re-squaring the frame.
Track and roller service
A sliding or hinged patio door that takes two hands to move usually has worn rollers or a track full of grit. We replace rollers, clean and align the track, and adjust the strike plate so the latch catches cleanly instead of chewing the frame.
Weather seal and adjust
Drafts around a patio door in winter, and dust lines on the sill in summer, point to flattened weatherstripping or a door that has fallen out of alignment. We replace the seal with the correct profile for your door brand and reset the panel so it contacts the gasket evenly on all four sides.
Sliding Door Repair
Sliding Door Repair is what we do when the panel that should glide side to side now jumps, grinds, or seizes. The most common cause we see in Fort Worth is a combination of hard water mineral buildup and roller bearings that have worn flat after years of daily use. Meridian Windows and Doors Fort Worth replaces rollers with the right diameter for the existing frame, not whatever is closest on the truck, and we shim the lower track so the weight of the glass panel rides on the hardware, not on the aluminum. Expect to pay $175 to $475 for most sliding door repairs, with the higher end covering a full roller swap and track repair on a heavy multi-panel unit.
Roller replacement
When a sliding panel starts to drop at the latch end or grinds over the track, the wheel assemblies have reached the end of their life. We install new rollers matched to the door manufacturer, clean the lower track channel, and test the panel until it moves with one hand.
Frame and lock correction
A sliding door that no longer locks properly is a security issue, not just an annoyance. We realign the panel, repair or replace the latch and keeper, and reinforce the frame if years of forcing the lock has wallowed out the screw holes.
Patio Door Replacement
Patio Door Replacement is the right call when the frame itself is failing, the glass seal has broken, or repairs would cost more than half the price of a new door. In Fort Worth, we replace patio doors in homes where the existing unit was installed in the 1980s or 1990s with single-pane glass, and homeowners are fighting both heat gain and rising energy bills. Meridian Windows and Doors Fort Worth pulls permits when required, removes the old door down to the rough opening, corrects any framing issues, and installs the new unit square and sealed. Replacing a standard 6-foot patio door in Fort Worth typically runs $1,800 to $4,200 installed, with material choice being the largest variable.
Full frame vs. insert
If the existing frame is straight and the flashing is intact, an insert replacement saves time and money. When the frame is rotted, warped, or out of square by more than a quarter inch, we pull it and rebuild the opening, which is the only way to get a true seal.
Glass package selection
We walk you through low-E coatings, argon between the panes, and impact-rated glass from our manufacturer lines. The right glass package for a west-facing patio door in Fort Worth is a low-E coating that reflects afternoon heat while still letting light through, and we will show you the numbers before you commit.
Sliding Door Replacement
Sliding Door Replacement swaps a worn-out horizontal slider for a new unit that seals tightly and operates smoothly for years. Fort Worth homes with original builder-grade sliding doors typically start showing real problems between year 12 and year 15, and by then the weatherstripping profile has been discontinued and the rollers are no longer manufactured. Meridian Windows and Doors Fort Worth replaces sliding doors across Tarrant County with units from ES Windows, ECO Window Systems, CWS, and CGI, chosen for the specific wall depth and sun exposure your opening actually has. A standard sliding door replacement in Fort Worth runs $1,900 to $4,500 installed, with larger multi-slide patio doors ranging higher based on panel count and glass options.
Aluminum vs. vinyl frames
Aluminum is strong and suits wide openings, but it conducts heat; vinyl insulates better but flexes more under a heavy glass panel. We will give you the straight tradeoff for your exposure and let the written price for each option do the talking.
Multi-slide and wide-opening work
Replacing a 12-foot or 16-foot multi-slide door means managing header loads and leveling a long track so nothing binds mid-travel. We have handled these openings in Fort Worth neighborhoods where the door wall faces the afternoon sun, and we install with level checks at every support point.
Sliding Door Installation
Sliding Door Installation is the process of putting a new sliding glass door into an opening, whether it is a fresh rough opening in new construction or a cut-down wall in a remodel. In Fort Worth, this work is governed by City of Fort Worth building codes that require proper header sizing, flashing, and drainage at the sill so water never finds its way into the wall cavity. Meridian Windows and Doors Fort Worth installs sliding doors to The Garrison Code, which means the sill is shimmed and sealed, the frame is foamed and taped at the flange, and the panel is adjusted for even gasket contact. New sliding door installation in Fort Worth, including the door itself, runs $2,000 to $5,200 on most jobs, and we deliver a written price before any work begins.
New opening preparation
Cutting a new door opening in an exterior wall means an engineer-specified header sized for the span, and we do not skip that step. The Rough opening gets framed a half-inch larger than the unit, flashed with butyl tape at the sill, and checked for level before the door ever leaves the truck.
Installation and sealing
The door goes in square, with shims only where the frame is designed to carry them, never bowing the jamb. We use low-expansion foam around the perimeter, backer rod and sealant at the exterior, and a sill pan that drains to daylight, not into the subfloor.
Brands We Service
We are authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, which means we are not locked into pushing one manufacturer’s inventory. That matters when the right fix for your Fort Worth home is a specific glass package or frame profile that only one line makes well. We have installed CGI impact-rated doors for homes in storm-exposed areas of Tarrant County, and we spec ES Windows and ECO Window Systems sliding doors where aluminum strength and thermal performance both matter on a wide glass wall.
CWS and ECO Window Systems make sliding patio doors we install regularly, and we know their hardware tolerances, track profiles, and the glass packages that perform best in North Texas heat. Whether you have CWS, CGI, ES Windows, ECO Window Systems, or something we have not listed, we can service or replace it. If you are not sure what brand is in your wall, we can identify it on the first visit and price the repair or replacement accordingly.
Signs You Need a Pro Right Now
- Water stains on the interior floor or wall near the door. This means the sill flashing or rough opening seal has failed, and water has been getting into places it will quietly rot. The longer it runs, the wider the framing repair gets.
- The door panel drops when you open it. A patio door that scrapes the track or hangs visibly lower at the latch end has failing rollers or a frame that is coming loose. Continuing to force it open chews the track and gets the panel out of square over time.
- You can feel air moving around a closed door. Worn weatherstripping or a misaligned panel lets conditioned air out and Fort Worth dust in. It is also a sign the seal is no longer doing its job against humidity, which leads to bigger problems in the wall cavity.
- The glass is fogged between panes. A failed seal lets moist air inside the insulated glass unit, and you cannot wipe it clean because it is between the panes. That fog means the unit has lost its insulating gas, and the only fix is a new glass unit or door.
- The lock no longer engages fully. A sliding door that will not lock is a real security weakness, and forcing the latch usually makes the problem worse. A pro can align the panel and replace the hardware so it actually secures.
Our Process, Step by Step
- 1
Measure and assess. Before we touch anything, we take exact rough opening dimensions, check the floor for level, and look at the condition of the existing frame, flashing, and wall structure. This tells us whether an insert works or a full replacement is needed.
- 2
Written price review. You get a line-item quote with the door, hardware, glass package, labor, and any framing or permit line items called out separately. The price we put in writing is the price we install for; it does not move at the door.
- 3
Open-up and framing correction. We remove the old unit carefully, repair any rotted framing around the rough opening, and correct the opening size and square. If the header or king studs need reinforcement, we handle that before the new door goes in.
- 4
Install and seal, test and adjust. The new door is installed square, shimmed at load points, foamed, taped, and sealed. We run the panel through its full travel, adjust rollers and latch hardware, and check the seal line with a flashlight at night angle.
- 5
Walkthrough and cleanup, then a written guarantee. We do a full walkthrough so you see the door operate, the seal around it, and the sill drainage. You sign off, we leave the site clean, and every installation and repair is covered by our 365-Day Done Right Promise in writing.
How Much Does Patio Door Installation Cost in Fort Worth?
A typical patio door installation in Fort Worth runs between how much Patio Door Installation costs - $1,800 and $4,800 for a standard 6-foot sliding unit, installed, depending on the frame material and glass package you choose. Multi-slide and oversized doors run higher, often $4,800 to $10,000 or more, because of the structural work and the heavier glass involved. If you are replacing a door in an existing opening, and the frame is square and the rough opening is undisturbed, an insert replacement will be on the lower end of that range. If we are cutting a new opening or rebuilding a rotted frame, the labor and framing add to the total.
What moves the price is the glass package first, then the frame material, then the condition of the rough opening. Low-E coated, argon-filled, and impact-rated units cost more than a basic clear-glass door, and they are usually worth it on any Fort Worth wall that catches afternoon sun. The best way to avoid overpaying is to see a written line-item quote that separates door cost from labor and framing, and to make sure the installer quotes the specific brand and model, rather than a generic “6-foot sliding door” that lets them substitute whatever is cheapest. Our estimates include the door, hardware, installation, sealing, clean-up, and the written 365-day guarantee, and the number on the estimate is the number on the invoice.
Our Service Area Near Fort Worth
Meridian Windows and Doors Fort Worth serves Fort Worth proper and the surrounding Tarrant County communities including Benbrook, Bedford, Mansfield, Colleyville, Watauga, Richland Hills, Crowley, Sansom Park, River Oaks, Haltom City, and Lake Worth. Typical response time for a service call is one to three business days for non-emergency repair in this area, and we will give you a specific arrival window when you book. If you are in one of those nearby cities, we are your local patio door team. You can also see our dedicated Patio Door Installation in Benbrook and Patio Door Installation in Bedford pages for city-specific details.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Patio Door Installation in Fort Worth
Patio Door Installation - Haltom City is the same process as in Fort Worth: installing a new exterior door unit, usually a sliding door or hinged French-style door, into an existing wall opening or a newly framed one, with the unit sealed, flashed, and adjusted to operate smoothly. It includes preparing the rough opening, setting the frame square, insulating and sealing around it, installing the active and fixed panels, and adjusting hardware. In Fort Worth, the work is done under city building code that governs flashing and drainage at exterior door openings.
Most standard patio door replacements in Fort Worth are completed in one day, including removal of the old unit, any minor framing correction, and installation. If a new opening is being cut or significant framing repair is needed, the job can run two to three days. We will give you a clear timeline in writing before work starts, and the schedule we commit to is the schedule we keep.
Expect to pay between $1,800 and $4,800 for a standard 6-foot sliding patio door installed in Fort Worth, with larger multi-slide units running higher. The final price depends on the glass package, frame material, and whether the rough opening needs repair. Call (682) 708-0962 for an exact quote, estimates are free.
Yes. We are authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, and we service these brands in the field. Our techs carry factory-spec hardware for the brands we install, so a repair uses the right roller, latch, or seal, not a generic part. If your door is a different make, we can still service it and price the work.
We have a live person answering the phone 24 hours a day, seven days a week at (682) 708-0962. If your door is jammed open, will not close, or the latch broke, call and we will get a technician scheduled as soon as possible. Every repair we do is covered by our written 365-day guarantee.
Every installation and repair we do is covered by our 365-Day Done Right Promise, in writing on every job. If the work fails within that full year, we return to correct it at no charge to you, including a free second visit if a repair or installation fails within the guarantee period. Labor exclusions are written in plain language, not buried in fine print.
Clear the area inside and outside the door, move furniture at least six feet back, and take down any window treatments that touch the frame or track. Your technicians will lay drop cloths and protect the floor, but removing anything fragile from the path is a good idea. If you have pets, keep them secured in another room for their safety and ours during the job.
Schedule Your Patio Door Installation Service in Fort Worth Today
If your patio door is sticking, leaking, or you are ready to replace it with a unit that seals and slides the way it should, call Meridian Windows and Doors Fort Worth at (682) 708-0962. You will get a live person, a straight answer, and a free in-home estimate with a written price before any work begins. Every job is covered by our 365-Day Done Right Promise. We are ready to get your door square.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fort Worth, serving Fort Worth since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.