New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Fort Worth Owner’s Guide
Mr-Glass door installation in Fort Worth typically runs $180 – $520 installed, with most jobs completed in under two hours on the first visit. We stock Mr-Glass-compatible door hardware, rollers, hinges, sweeps, and weatherstripping on our trucks, and in most cases one of our technicians can match the part, replace it, and test the door before we leave. How owners usually find us: the door was fine through the fall, then the first cold front rolls in and suddenly it drags, binds, or lets a blade of daylight through the threshold. In Fort Worth, the swing from humid August to dry January works seals and rollers hard, and failures tend to announce themselves right around the first hard freeze.
Which Mr-Glass Models This Applies To
Mr-Glass produces sliding glass doors, hinged patio doors, and multi-panel configurations used widely in Texas homes built from the late 1990s onward. The most common units we service in Fort Worth are the two- and three-panel sliders, along with single French-style hinged doors. Before calling, check the bottom edge of the door panel or the top rail for a small manufacturer sticker. If the sticker is gone or worn off, measure the glass panel height and width, and note whether the rollers sit on the bottom rail (adjustable from the inside edge) or the sides.
We treat Mr-Glass parts as OEM-first. The factory rollers and locks are machined to tighter tolerances than most generics, and on older Mr-Glass doors, the OEM hardware is often the only option that seats correctly without shimming. That said, for common wear items like sweeps, weatherstripping, and some guide tracks, a quality aftermarket equivalent can outlast the original in Texas heat, especially if the original material was nylon or low-density vinyl. One compatibility gotcha we see regularly: a Mr-Glass slider made before 2005 often uses a 1-1/8 inch roller housing, while newer panels use a 1-inch housing. Mixing those up is the fastest way to buy the wrong part twice.
Signs Your Mr-Glass Door Installation Is Failing
- The door drags or requires a shoulder to open. This is almost always roller wear. Mr-Glass rollers carry the panel’s full weight, and after ten to fifteen years in Fort Worth dust and humidity, the bearings flatten. A door that drags today will bind completely within a season.
- Visible daylight or a draft along the bottom edge. The sweep or threshold compression is worn, or the panel has settled out of alignment. In January, that gap is where your heat goes; in July, it’s where Fort Worth humidity gets in.
- The lock will not engage or binds halfway. Mr-Glass latch hardware is finicky. If the panel has shifted even 1/8 inch out of square, the hook or latch misses the strike plate. Forcing it is how homeowners snap internal linkage.
- Condensation or fog between the glass panes. This means the sealed unit has lost its argon fill and the desiccant strip is saturated. The installation is still functional, but the insulation value is gone, and in direct Texas sun the glass gets noticeably hot to the touch.
- Metallic grinding or grit sound when sliding. A bearing has disintegrated and the roller is dragging bare metal on the track. Continued use scores the aluminum track itself, which then requires a track replacement, not just rollers.
Replacement Cost & What’s Included
Most Mr-Glass door installation of replacement parts in Fort Worth runs between $180 and $520, parts and labor. The spread depends on the part: a sweep or weatherstrip kit is toward the low end, a pair of OEM rollers is mid-range, and the high end covers oversized multi-panel sliders, track repairs, or replacing a full sealed glass unit. You will get a written price before a single screw turns, and it does not move by the time we pull into your driveway.
Every part we install is covered in writing for 365 days under our Done Right Promise. If a roller fails or a lock binds within that year, we come back at no charge. The free second visit is part of the contract. For the work itself, our price includes the part, the labor, alignment and testing, and haul-off of the old hardware. Nothing gets recycled onto your bill.
DIY or Call Us?
Some things you can safely check yourself: whether the track is packed with dirt (a stiff brush fixes that), whether the alignment screws on the roller housing are backed out, whether screws along the frame have loosened. Those checks cost nothing and sometimes solve a light drag.
Replacing Mr-Glass rollers is a different kind of job. The panel weighs more than most people expect, and it has to come out of the frame. High-tension? No. But a dropped 80-pound glass panel is a trip to the ER and a lot more than the part cost. For anything involving lifting the panel out, adjusting structural alignment, or working with the lock linkage, call (682) 708-0962. We will tell you the straight answer on the phone before we schedule the truck. Meridian Windows and Doors Fort Worth is an independent service provider; we are not affiliated with Mr-Glass, but we stock and install their hardware because Fort Worth homes have a lot of it.
FAQs
In Fort Worth, with our dust, humidity swings, and heat, Mr-Glass rollers typically last 10 to 15 years before bearings show wear. A door used daily on a west-facing wall in direct afternoon sun may need rollers at 8 to 10 years. Call (682) 708-0962 for an inspection and a written quote.
Yes, in most cases. Mr-Glass components like rollers, sweeps, locks, and tracks are replaceable, and we replace the failed part rather than selling an entire door. If the panel itself has fogged glass, the sealed unit is replaced without replacing the frame. Call (682) 708-0962 and we will tell you which parts the door actually needs.
Most Mr-Glass door part installations take one to two hours. The exceptions are multi-panel sliders with track damage or sealed glass units, which may require a second trip for measuring and glass ordering. Either way, you will know the timeline before we schedule.
Our trucks carry the most common Mr-Glass parts: rollers, sweeps, weatherstripping, and lock hardware. For less common components or sealed units, we order OEM or spec from our supplier network, which includes PGT, CGI, and CWS parts lines as well. We will tell you on the first call whether your part is a truck-stock item or needs ordering.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fort Worth at Meridian Windows and Doors Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.