New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Impact Garage Doors: The Fort Worth Owner’s Guide
CWS impact garage doors in Fort Worth typically cost $3,200 to $6,800 installed, depending on size, series, and whether we’re replacing the full unit or a failed section. We stock the most common CWS door parts and can usually match a failed component same week, with the full door ordered directly against your existing frame measurements. Most homeowners don’t discover the part failure until the door binds mid-lift, a bottom seal tears loose during a storm, or the panel shows hairline cracks after a hailstorm clips the face.
You’re on this page because something on your CWS door stopped doing its job. Maybe the rollers sound like gravel in a bucket. Maybe the panel flexed too far in the last north wind and now the lock doesn’t line up. Whatever it is, we’ll tell you straight what’s worth repairing, what’s worth replacing, and what it costs before we touch a single screw. We’re an independent service provider, not affiliated with CWS, which means we source parts and doors directly against the CWS spec sheets and our own field measurements. No brand markup games, no “we only install what we stock” runaround. We carry parts for PGT, CGI, and ES Windows impact doors as well.
Which CWS Models This Applies To
CWS builds impact-rated garage doors across a handful of series lines. The ones we see most often in Fort Worth are the CWS StormPro series, the CWS ImpactGuard line, and the heavier-gauge CWS Titan models used on wider three-car openings. Each series has a different panel profile and roller track geometry, and the parts do not swap cleanly between them. A StormPro roller bracket won’t sit right on an ImpactGuard track, and the pin sizes on the Titan hinges are a full gauge thicker. If you’re holding a part in your hand and not sure, the label is usually stamped on the inside face of the bottom panel near the hinge line, showing the series code and the build date. Take a photo of that label and text it over before we dispatch.
For older CWS doors, the original OEM hardware is still available directly through CWS distributors, but lead times run three to six weeks. A quality aftermarket equivalent, sized to the same gauge and pin diameter, often lands faster and matches factory spec. We’ll tell you which way makes sense on a door-by-door basis. The deciding factor is almost always the roller diameter and the hinge pin thickness, not the brand name stamped on the box.
Signs Your CWS Impact Garage Doors Is Failing
- The door binds or shakes on the way up. This is almost always a roller that’s flattened on one side, which happens when a track gets knocked out of alignment by wind or a vehicle bump. The flat roller can’t track smoothly, and the motor starts fighting the door.
- You hear a metallic screech when the panels hinge. Steel-on-steel grinding at the hinge line means the hinge pins have worn through their bushings. Left alone, the panel edge starts galling and the repair cost climbs from hinge replacement to panel work.
- The bottom weather seal is torn or hanging. Sun and Texas heat turn the rubber seal brittle in about three years. A torn seal lets water, debris, and insects into the garage, and it voids the impact rating on the door bottom because the seal is part of the engineered assembly.
- One panel shows spider cracks or flexs more than the others. Impact-rated panels are laminated and designed to flex as a unit. When a single panel starts flexing independently, the lamination bond has failed and that panel is doing no more than a standard non-impact panel.
- The lock or latch no longer lines up. This one is usually not the latch at all. The door has shifted on its track, or the panel has sagged slightly, which throws the alignment off. Misaligned locks on impact doors often indicate something structural shifted behind the panel face.
Replacement Cost & What’s Included
Here’s the honest price picture for Fort Worth. A single panel replacement on a CWS impact door runs $580 to $1,300 installed, depending on series and window cutouts. Full hardware refresh (rollers, hinges, brackets, seal) typically lands between $450 and $900. Full door replacement, meaning the entire CWS unit sized and installed, runs $3,200 to $6,800 for most standard two-car openings. The spread is driven by door size, series, window packages, and whether we’re reusing the existing track or replacing it.
| Service | Installed Price Range |
|---|---|
| Single panel replacement | $580 – $1,300 |
| Hardware refresh (rollers, hinges, brackets, seal) | $450 – $900 |
| Bottom seal replacement only | $120 – $260 |
| Full CWS impact door replacement (2-car) | $3,200 – $6,800 |
| Full CWS impact door replacement (3-car) | $5,800 – $9,500 |
Every price we give is written down before work starts and it does not move at the door. You get a line-item quote, the part number or series code on the sheet, and the labor broken out separately. The work is covered in writing for 365 days. If the repair fails within that year, we come back and make it right at no charge. That’s the Done Right Promise on every single job we run in Fort Worth.
DIY or Call Us?
You can safely check a few things yourself. Run the door up and down and watch for a wobble or a flat roller. Shine a flashlight on the bottom seal and look for cracks or tears. Check the label on the inside bottom panel and write down the series code. All of that takes ten minutes and it helps us quote accurately over the phone.
What you should not do is touch the torsion springs or the cables. CWS impact doors weigh between 300 and 500 pounds depending on size, and the torsion assembly holds that weight under high tension. A spring that lets go in your face is a hospital trip, not a learning experience. The same goes for the cables and the bottom brackets. If the door is off its track, leave it where it sits and call us. We’ll dispatch a crew with the right winding bars and the right respect for what’s stored in that spring. Call (682) 708-0962 and we’ll get eyes on it.
FAQs
A properly installed CWS impact door in Fort Worth lasts 18 to 22 years, with the bottom seal and rollers needing replacement every 3 to 5 years. The Texas sun and heat are harder on the seal and the panel lamination than the wind is. Call (682) 708-0962 and we’ll tell you honestly whether yours is worth repairing or has hit the end of its service window.
Most of the time, no. A delaminated or cracked impact panel has to be replaced because the laminated core is the structural element, and you can’t re-laminate a panel in the field. Hardware, seals, and rollers are a different story and we repair those regularly. Call (682) 708-0962 with your series code and we’ll tell you which category yours falls into.
A hardware refresh or bottom seal replacement takes two to three hours on site. A single panel swap takes half a day because we have to disconnect the door, replace the panel, and re-tension the assembly. A full door replacement runs one full day. We’ll give you the time window in writing when we quote the job.
We keep the most common CWS rollers, hinges, brackets, and seals on the truck and in our Fort Worth shop. Series-specific panels and full doors are ordered against your measurements and typically arrive within five to ten business days. If you need something today, call (682) 708-0962 and we’ll tell you exactly what we have on hand.
Key Takeaways
- Fort Worth CWS impact door repairs range from about $120 for a seal to $6,800 for a full 2-car door replacement
- Every price is written down before work starts and covered by a 365-day guarantee
- Never touch torsion springs or cables on your own; the tension can kill you
- We stock common CWS parts locally and can source series-specific panels in five to ten days
Call Meridian Windows and Doors Fort Worth
If your CWS impact garage door is making noise, sagging, or leaking at the seal, call us at (682) 708-0962 for a free estimate. We’ll come out, look at the label, measure what matters, and put a number in front of you before anything gets ordered. Elliot Vance runs the crew, and he carries the same discipline he learned at Los Angeles Trade-Technical College into every Fort Worth job site. The seal either holds or it doesn’t and we make sure it holds.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fort Worth at Meridian Windows and Doors Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.