New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Patio Door Installation in Fort Worth: What to Know First
CWS patio door installation in Fort Worth is work we take on regularly as an independent CWS service provider. A typical replacement runs 1 – 2 days once the door is in hand, and our price goes on paper before we order a single part. You’ll know the number before you decide – that’s how we work, no exceptions.
This page is for Fort Worth homeowners who already own a CWS patio door, or are considering one, and want an installer who knows the product line well enough to do the job right the first time. Call us at (682) 708-0962 for a free estimate.
Key Takeaways
- We install and replace CWS patio doors in Fort Worth as an independent provider – not a CWS subsidiary.
- Written price before work starts, covered by our 365-Day Done Right Promise in writing.
- We stock or order CWS-compatible parts, including aftermarket options when they outperform OEM on older doors.
How CWS Products Fail – and How We Fix Them
CWS builds a solid door. In Fort Worth’s heat and humidity swings, though, certain things wear faster than the rest. Here’s what we see most, by series:
- CWS Series 75 (sliding glass – older models): The roller carriages use steel ball bearings inside a plastic housing. After 6 – 8 years of Texas heat, that housing gets brittle and the bearings bind. The door drags, skips, or jumps the track. We replace the carriage assembly, not just the wheel – patching the wheel gets you another season at best.
- CWS Series 95 (multi-slide / stacking): These doors are heavy, and the real failure point is the interlock channel where panels meet. If a panel shifts even a quarter inch, the weatherstripping splits at the seam and air passage starts. We re-shim and re-align the entire track run, then replace the interlock gaskets as a set – never one side alone.
- CWS Signature Line (hinged French doors): The sill cap is the weak point here. Fort Worth’s clay soil expands and contracts with moisture, and older CWS Signature sills were designed with less flex tolerance. The sill bows, the door drops, and the latch plate misses the strike by a fraction. We pull the door, plane or shim the slab, and re-set the sill with a proper sealant bed.
- CWS Series 80 (standard slider): The top track guide – that little plastic tab in the header – snaps more often than it should on this series. It’s a $12 part, but if it breaks and the homeowner keeps forcing the door, the panel can come out of the track entirely. We check it on every CWS call we run in Fort Worth, whether the homeowner thinks it’s broken or not.
- CWS TrueView (contemporary narrow-frame): The frames are built for tight sightlines, which means the weatherstripping channels are narrower than on other lines. If the door is installed even slightly out of square, the stripping kinks and leaks show up within a year. We don’t just swap the door – we correct the opening, then hang it. That’s the difference between a five-year install and a one-year callback.
Our CWS Patio Door Installation Process
- 1
Call comes in. You talk to a live person. We schedule a window that works, and the tech shows up in a company uniform, background-checked.
- 2
We inspect the door and the opening. Not just the panel – the framing, the subfloor, the head trim. A CWS door that fails twice usually fails twice for the same reason we find on the first visit.
- 3
We give you the written price. One number for the full job. If we uncover something hidden during the work, we stop and tell you before touching it. No surprise additions at the door.
- 4
We make the parts decision with you. Some CWS parts are worth going OEM – factory glazing and rollers, in particular. Other pieces, like aftermarket multi-point locks on older Series 75s, hold up better than the originals. We show you the trade-off and let you choose.
- 5
The install happens. We set the door, shim it square, shoot the gaps, and trim out clean. The seal either holds or it doesn’t – we make sure it holds.
- 6
We test it with you. You watch the door slide or swing before we leave. Then it’s covered in writing for 365 days. If it fails, we come back at no charge.
What CWS Patio Door Installation Costs in Fort Worth
Here’s where most CWS patio door installation jobs in Fort Worth land, based on what we’ve quoted across Tarrant County this year:
| Job Type | Typical Range (Installed) |
|---|---|
| Replace rollers + re-align a CWS slider (single panel) | $340 – $580 |
| Full CWS Series 75 slider replacement (72″ x 80″) | $2,400 – $3,600 |
| CWS French door replacement, sill correction included | $3,100 – $4,800 |
| Multi-slide CWS door re-track (per panel) | $500 – $900 |
| Weatherproofing package: sill gasket, perimeter seal, threshold | $280 – $450 |
What moves the price: whether we’re replacing the door or rebuilding the opening, damage hidden behind the frame, and whether you choose OEM or aftermarket hardware. Call (682) 708-0962 for an exact quote – estimates are free, and the number you get is the number you’ll pay.
Why Fort Worth Homeowners Call Meridian Windows and Doors Fort Worth for CWS Work
We’re part of the Garrison Partners family, held to The Garrison Standard since 2009. That standard is simple: arrive when we say, price honestly, and stand behind the work. A meridian is a fixed line you measure everything against – that is what the name means and how we run every install.
Every job gets a written price before we start, and every install is covered by our 365-Day Done Right Promise. If it fails within a year, we come back at no charge. Our techs know CWS – and if the day ever comes that replacement makes more sense than another repair, we can quote you real options from PGT, CGI, ES Windows, and ECO Window Systems without starting the conversation over.
Elliot Vance has been measuring, fitting, and finishing doors across Texas for over two decades, and he’s the one holding our crew to the standard.
FAQs
No. As an independent CWS service provider, our installation work does not invalidate the manufacturer’s product warranty. Parts we replace under CWS’s coverage still follow CWS’s terms; workmanship is covered by our written 365-Day Done Right Promise regardless of the brand.
Both, depending on the part. For glazing, factory rollers, and structural components, we order CWS OEM parts. For locks and certain hardware on older CWS Series 75 doors, we sometimes recommend aftermarket parts that outlast the originals. We show you the options and the cost difference before we order anything. Call (682) 708-0962 and we’ll tell you exactly what your door needs.
Most CWS patio door installations in Fort Worth are completed within one to two working days once the door is on site. Factory lead time on new CWS doors is typically 2 – 4 weeks depending on size and finish. If the opening is clean and the door is in hand, we often finish the job in a single day.
If the frame is square and the glass is intact, repair is usually the better call and will run a fraction of replacement cost. In Fort Worth, we replace CWS doors when the frame has rot, the sill is bowed beyond correction, or you want to change the configuration. We’ll tell you the straight answer either way – call (682) 708-0962 to schedule a look.
You call us, and we come back at no charge. The 365-Day Done Right Promise covers every CWS patio door installation we perform in Fort Worth, in writing, for a full year from the day we finish. That includes a second visit if the repair or install fails within the guarantee period.
We install CWS patio doors, and we can source the door for you through our supplier network if you haven’t purchased it yet. As an independent provider, we’re not a CWS dealer, but we quote the full door-and-install package as one written price. Call (682) 708-0962 and we’ll price your exact door.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fort Worth at Meridian Windows and Doors Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.