CGI Window Replacement Nationwide

CGI Window Replacement: The Fort Worth Owner’s Guide

CGI window replacement in Fort Worth typically runs $85 – $210 per window unit for the part itself, with full service-and-install jobs landing between $165 – $410 per opening depending on the CGI series and hardware involved. We stock CGI-compatible replacement parts on our trucks and can usually complete the swap the same day we arrive. Most Fort Worth homeowners discover the problem the hard way: a window that won’t latch, a sash that drops when you let go, or a crank handle that spins without moving the glass. By then, the part has been failing for weeks.

Call (682) 708-0962

Which CGI Models This Applies To

CGI’s Fort Worth footprint splits into two main lines: the Estate Collection and the Sentinel Series. Estate windows use a heavy extruded aluminum frame with stainless steel roller assemblies; Sentinel units run a slightly slimmer profile with nylon-guided rollers and a different balance system. The parts do not interchange between the two, which is the single most common ordering mistake we see from online buyers. Your window has a label etched or printed on the frame edge, usually top or bottom corner, with a CGI part code that starts with either “ES” (Estate) or “SN” (Sentinel). That code is the only reliable way to match the piece; frame measurements alone will fool you because both lines share several sightline widths. We always recommend OEM CGI parts for anything load-bearing: balances, hinges, rollers, and tilt latches. For trim items like screen clips and weatherstripping, quality aftermarket equivalents from our other stocked lines (PGT, CWS, ES Windows) often fit and save you money, and we’ll tell you when that’s the smarter call.

Signs Your CGI Window Replacement Is Failing

• Sash drops or won’t stay open. The balance system has lost tension. In Fort Worth’s heat, the internal coil or block-and-tackle spring fatigues faster than in cooler climates, and once one balance fails, the other side follows within months.
• Window won’t latch or lock. The latch strike has slipped out of alignment or the keeper is bent. Left alone, an unlatched CGI window invites drafts and, worse, gives an intruder a quiet entry point.
• Crank handle spins without moving the sash. The operator gear teeth have stripped. CGI operators are built well, but after years of the classic Texas humidity-dry cycle, the internal gearing can bind and strip on the first hard turn of summer.
• Visible corrosion on the roller or hinge hardware. Salt-laden Gulf air drifting over North Texas, plus Fort Worth’s hard water, accelerates oxidation on exposed aluminum hardware. Once the corrosion crusts, the part is done.
• Window binds or shudders when opening (single or double hung). The rollers have flattened or the track is loaded with debris. In Fairmount Historic District homes especially, decades of paint and frame settling make this a regular call for us.

Replacement Cost & What’s Included

For Fort Worth homeowners, here is the straight pricing picture. Balances on a CGI Sentinel single hung: $45 – $85 per window, parts only. Estate roller assemblies: $60 – $120 per sash. Operators or crank mechanisms: $55 – $100. Tilt latch sets: $25 – $40. Full replacement glass for a standard CGI insulated unit (low-E glass, which is coated to reflect heat while letting light through): $180 – $410 per opening installed, depending on glass package and whether the frame needs reglazing. Labor runs $75 – $140 per opening on top of parts. You get the written price before any work starts, and it does not move at the door. Every replacement carries our 365-Day Done Right Promise: if that part fails within a year, we come back at no charge.

DIY or Call Us?

You can safely check the frame for the etched CGI part code and snap a photo of it before calling; that photo alone saves us a trip. Tightening a loose latch keeper you can often handle with a Phillips driver. Beyond that, CGI windows are not kind to DIY work. Hollow-frame balance replacement involves releasing spring tension under load, and if you don’t know where to put the release tool, that spring will cut you. We’re an independent service provider, not affiliated with CGI, but we install and replace these parts every week across Fort Worth. If you’re unsure, call us at (682) 708-0962 and describe what the window is doing; we’ll tell you over the phone whether it’s a parts-only job or something a technician should look at.

FAQs

How long do CGI window parts last in Fort Worth?
Most CGI hardware lasts 10 – 15 years in North Texas, but the heat and humidity cycles of Fort Worth summers can cut balance life to 8 years or less, especially on west-facing windows that bake in the afternoon sun. Call (682) 708-0962 if your windows are near that age and giving you trouble; we’ll price the repair honestly before you commit.

Can a failing CGI window be repaired instead of replaced?
Yes, in most cases the part is replaceable and the full frame and glass stay put, which keeps your cost down. The exceptions are frames that have rotted or warped from a long-running leak, and then we will tell you the straight answer even if it means a bigger job. Call us with your CGI part code and we’ll tell you what’s possible.

How long does a CGI window part swap take?
A typical balance, roller, or latch replacement takes 30 – 60 minutes per window once we’re on site. Full reglazing or multi-window jobs can run half a day, and we’ll give you that timeline in writing before work starts. Reach us at (682) 708-0962 to schedule a time that works for you.

Do you stock CGI replacement parts or do you have to order them?
We keep the most common CGI parts on our trucks: balances, roller assemblies, latches, and weatherstripping for both Estate and Sentinel lines. Unusual or low-volume components may take 3 – 5 business days to bring in, and we’ll tell you the lead time before you commit. Call (682) 708-0962 for availability on your specific model.

Written by Elliot Vance, Owner, Meridian Windows and Doors Fort Worth at Meridian Windows and Doors Fort Worth, serving Fort Worth and nearby areas.